|
Post by andyd on Mar 6, 2018 15:07:41 GMT
As the prime seems to be one a lot have,, hows about a show your build off thread ? thats 0.35mm kanthal came out at 1.14ohms wind the coil to fit the deck, dont worry Too much about the number of winds,, get it to Span the deck without being too much wire the cotton , its a single sheet of muji With both skins peeled off, cut it flush with the threads for the tank bit & tucked into the "D" shapes,, after fluffing ,, dont pack it in coil base is about Level with the top of the screw tops 1-2mm gap if it is a China atty , WASH the bugger as chinamans ball sweat taste Will come through and mute all the flavours (unless you like the taste of ball bag sweat,, )
|
|
Balders
Posts: 2,465
Last Online Jan 30, 2023 22:23:11 GMT
Likes: 2,680
Feb 27, 2017 16:56:59 GMT
|
Post by Balders on Mar 6, 2018 15:31:45 GMT
Like the idea of this thread, I would also like to see a another thread with a variety of different atty's with members built coils, could be a good reference point for others.
|
|
|
Post by SputNik on Mar 6, 2018 15:36:20 GMT
Didn't we have one In the shed ....something like show us your builds
|
|
taff
Posts: 4,071
Last Online Apr 6, 2023 15:17:41 GMT
Likes: 3,290
Mar 1, 2017 20:00:42 GMT
|
Post by taff on Mar 6, 2018 15:45:27 GMT
yes we did mate..Remember putting my genny builds on there...
|
|
|
Post by andyd on Mar 6, 2018 15:54:49 GMT
ill Try and do the same for the other attys i have,, Without a wonky coil in, (that for me is a Wonky naff coil !)
|
|
taff
Posts: 4,071
Last Online Apr 6, 2023 15:17:41 GMT
Likes: 3,290
Mar 1, 2017 20:00:42 GMT
|
Post by taff on Mar 6, 2018 16:02:00 GMT
everybodys going to go and have a good look at the coil now mate!! Look out!!
|
|
|
Post by SputNik on Mar 6, 2018 16:07:37 GMT
I have to admit that I half expected Mike to come back with a build like this ....photo stolen from someone else (not my build)
|
|
|
Post by mfvape on Mar 6, 2018 16:13:36 GMT
Hi Andy, cheers for doing this, appreciate the pics and instructions. Yeah, from China, gave it a thorough wash before hand, think I may have slightly too much cotton, was trying to build it in 5 mins then out for a quick puff at lunchtime...will take my time when home later. Thanks again!
|
|
|
Post by mfvape on Mar 6, 2018 16:37:50 GMT
Success, tried it after sitting for a couple of hours, 14w, 3rd smallest airhole open, getting some good flavour, impressed with how smooth the airflow is. Good stuff
|
|
Balders
Posts: 2,465
Last Online Jan 30, 2023 22:23:11 GMT
Likes: 2,680
Feb 27, 2017 16:56:59 GMT
|
Post by Balders on Mar 6, 2018 16:46:56 GMT
Didn't we have one In the shed ....something like show us your builds We have a section called Wick, Wire & Coil Builds and there is also a thread in there already called Show me your coils, perhaps we should rename it.
|
|
|
Post by andyd on Mar 6, 2018 16:51:39 GMT
ah bugger,, er thats me posting in the wrong place then,, can you , do the thingy with the wossit and,, zapper this to the right sub forumdoodah then?
|
|
taff
Posts: 4,071
Last Online Apr 6, 2023 15:17:41 GMT
Likes: 3,290
Mar 1, 2017 20:00:42 GMT
|
Post by taff on Mar 6, 2018 16:53:43 GMT
Admin will have to do that Andy..
|
|
Balders
Posts: 2,465
Last Online Jan 30, 2023 22:23:11 GMT
Likes: 2,680
Feb 27, 2017 16:56:59 GMT
|
Post by Balders on Mar 6, 2018 17:05:58 GMT
Admin will have to do that Andy.. You already have that option taff it just that you never used it.
|
|
|
Post by mfvape on Mar 6, 2018 17:07:13 GMT
I have to admit that I half expected Mike to come back with a build like this ....photo stolen from someone else (not my build) Oi oi saveloy 😂
|
|
taff
Posts: 4,071
Last Online Apr 6, 2023 15:17:41 GMT
Likes: 3,290
Mar 1, 2017 20:00:42 GMT
|
Post by taff on Mar 6, 2018 17:07:18 GMT
It used to come up for me Ian, but looking at that thread, now it doesnt mate.. no option to rename the thread..
|
|
Balders
Posts: 2,465
Last Online Jan 30, 2023 22:23:11 GMT
Likes: 2,680
Feb 27, 2017 16:56:59 GMT
|
Post by Balders on Mar 6, 2018 17:12:29 GMT
It used to come up for me Ian, but looking at that thread, now it doesnt mate.. no option to rename the thread.. You should be able to rename it as that option is enabled for you as I have just checked, but andyd wanted the thread moving to the correct section which I have just done, and you also have that ability to do that as well.
|
|
|
Post by SputNik on Mar 6, 2018 17:19:07 GMT
I have the ability to move it in tapatalk...but Ian beat me to it
|
|
|
Post by andyd on Mar 6, 2018 17:20:01 GMT
ta boss
|
|
Balders
Posts: 2,465
Last Online Jan 30, 2023 22:23:11 GMT
Likes: 2,680
Feb 27, 2017 16:56:59 GMT
|
Post by Balders on Mar 6, 2018 17:25:09 GMT
Got to keep your customers happy andyd.
|
|
|
Post by andyd on Mar 6, 2018 17:31:53 GMT
hang on customers,, i dont have any more happy // me same sentance ? ? ? trades desc act "!"
|
|
Balders
Posts: 2,465
Last Online Jan 30, 2023 22:23:11 GMT
Likes: 2,680
Feb 27, 2017 16:56:59 GMT
|
Post by Balders on Mar 6, 2018 17:42:10 GMT
hang on customers,, i dont have any more happy // me same sentance ? ? ? trades desc act "!" There's always the first time.
|
|
|
Post by Cyborg on Mar 9, 2018 9:41:13 GMT
Please forgive the quality of the pictures. 7 wraps of 28G stainless steel around a bolt to get the spaced coil, came out at 1.32 Ω. Used an SS coil in TC mode because I am using the extension and the large SS tank off a Kayfun 5 on an Aegis for a bomb proof setup, as I can’t see my liquid using TC stops any dry hits and I know when its time for a fill.
|
|
|
Post by SputNik on Mar 10, 2018 13:57:32 GMT
|
|
|
Post by andyd on Mar 10, 2018 14:10:43 GMT
nicely spaced (ill post you mine next time it needs a recoil/wick,, ) what is becoming clear,, Non of us (so far) are using yards of cotton, or Big diameters (scottish roll type) of cotton, the prime Does seem to be a "less is better" tank (like the kayfuns before it)
|
|
|
Post by SputNik on Mar 12, 2018 16:05:08 GMT
And now look at it this is after 6ml of juice
|
|
|
Post by possum on Mar 13, 2018 2:33:22 GMT
Jez SputNik were you vaping Brent crude there
|
|
|
Post by SputNik on Mar 13, 2018 11:08:16 GMT
Jez SputNik were you vaping Brent crude there Lol it's Victoria sponge from Tripp Hammer mate
|
|
|
Post by mfvape on Mar 15, 2018 10:24:08 GMT
Got the hang of this now, 6 wraps of 28awg Kanthal, 1.2ohms. Going to attempt to review this later, be gentle on me Thanks to andyd for pointing me to this thread, appreciate it
|
|
Balders
Posts: 2,465
Last Online Jan 30, 2023 22:23:11 GMT
Likes: 2,680
Feb 27, 2017 16:56:59 GMT
|
Post by Balders on Mar 15, 2018 11:21:46 GMT
Nice tidy looking coils you have there mfvape.
|
|
|
Post by mfvape on Mar 15, 2018 11:45:12 GMT
|
|