Balders
Posts: 2,465
Last Online Jan 30, 2023 22:23:11 GMT
Likes: 2,680
Feb 27, 2017 16:56:59 GMT
|
Post by Balders on May 14, 2017 11:09:58 GMT
Whether your into making them fancy clapton coils or just plain kanthal coils lets see some of your coil pictures in here. Also if you want provide some details of what sizes of wire you have used and also what diameter and what ohms they have come out to. It may also help those who just venturing into making their own coils.  |
|
|
|
Post by bear on May 14, 2017 21:53:23 GMT
2 coils 5.5 wraps 2.5mm inside diameter wire is Kanthal A1 0.5mm 24AWG     |
|
Balders
Posts: 2,465
Last Online Jan 30, 2023 22:23:11 GMT
Likes: 2,680
Feb 27, 2017 16:56:59 GMT
|
Post by Balders on May 15, 2017 5:39:11 GMT
Very nice tidy coils bear, thanks for sharing them with us |
|
|
|
Post by Cyborg on May 16, 2017 11:40:52 GMT
Only coil pic I have.  This is it in action  |
|
sasha1981
Full member
Posts: 155
Last Online Dec 25, 2017 17:04:17 GMT
Likes: 218
Mar 5, 2017 0:01:20 GMT
|
Post by sasha1981 on May 16, 2017 16:41:33 GMT
1. Twisted homemade clapton wraped with 0.8ss ribon 2. 0.13mm SS on 3mm sextacoil in a aromamizer   |
|
Deleted
Deleted Member
Posts: 0
Last Online May 10, 2024 12:17:50 GMT
Likes:
May 10, 2024 12:17:50 GMT
|
Post by Deleted on May 16, 2017 21:44:51 GMT
  Standard spaced coil for me, 1.42ohms 0.28mm kanthal 2.5mm Id the Other coils i do look the same in Ni200 (3mm id) and a bit longer/shorter to fit the deck |
|
|
|
Post by sarahf on May 19, 2017 1:42:28 GMT
  After it took me ages to make YES make the Clapton wire I had a go with this. I have to say I much prefer just single coil bog standard " easy faff free " vaping. |
|
Deleted
Deleted Member
Posts: 0
Last Online May 10, 2024 12:17:50 GMT
Likes:
May 10, 2024 12:17:50 GMT
|
Post by Deleted on May 25, 2017 2:01:55 GMT
Well I've kinda been enjoying trying a few different wires lately, and come to the conclusion that plain kanthal round wire is best for me. I've mainly stuck to a 0.35ohm 3mm id 24g dual coil, the problem being it's not that great on a mech. My favourite build had always been a 0.5ohm 2.5mm id 26g dual coil. Not used that build for a few months, but popped it in the Sapor on top of the cuboid at 30w. Instant ramp up, warm and very good flavour.  You can keep your fancy coils, it's the perfect build for me  |
|
|
|
Post by bear on Mar 28, 2018 16:09:34 GMT
GeekVape Blitzen RTA 2 coils 5.5 wraps 2.5mm inside diameter wire is Kanthal A1 0.5mm 24AWG     |
|
