taff
Posts: 4,071
Last Online Apr 6, 2023 15:17:41 GMT
Likes: 3,290
Mar 1, 2017 20:00:42 GMT
|
Post by taff on Mar 13, 2017 18:58:05 GMT
This is a copy of a post I did a while back now on a USA forum I have been a member of for some time...about the In'Ax MkIII genisis atty I had just popped a wick and coil on. Thought some folk that are into Gennys might find it mildly interesting! Here is a couple of images of the build i did for the In'Ax MKIII that a proper Gent by the name of Vaya, sourced for me..and that arrived this afternoon. Thanks mate you are a star. First thing I did was swap out the center post for a threaded one I had purchased a while back. far better and easier to build with than those bloody grip-sticks! Wicked it with 200 Superfine mesh and a 300 mesh topper. Coiled with 28 gauge Kanthal 3/4 wraps for 1.1 ohms. The first image shows the coil glowing nicely after getting rid of a couple of hot spots, only got a couple and far less than i thought i would get to be fair. The second image is the first fire with juice in the tank, just to make sure it would wick ok.. Its vaping like a dream. No dry hits, not even a trace of one, just superb flavour, and lots of vapour.. Really liking this atty. Let it run until the mod cut out at 10 seconds.. wicking great, good vapor all the way. It does like the juice though.. tank goes down quickly! Good thing I make my own and don't have to buy it in! Apologies for the messy background, its the tray I use for building on with some of my tools on there, and my fat fingers getting in the second image! Hard to get a picture while pressing the fire button and trying to take a picture one handed on my phone!
|
|
Balders
Posts: 2,465
Last Online Jan 30, 2023 22:23:11 GMT
Likes: 2,680
Feb 27, 2017 16:56:59 GMT
|
Post by Balders on Mar 13, 2017 19:13:07 GMT
I remember seeing that on ECF if I'm not mistaken taff and the In'Ax MKIII is a superb atty and a great flavour producer.
|
|
|
Post by phtumshk on Mar 13, 2017 19:20:51 GMT
Ah, I see theyve dun away with them *expletive* springs for holding the wire on.
|
|
taff
Posts: 4,071
Last Online Apr 6, 2023 15:17:41 GMT
Likes: 3,290
Mar 1, 2017 20:00:42 GMT
|
Post by taff on Mar 13, 2017 19:27:26 GMT
I remember seeing that on ECF if I'm not mistaken taff and the In'Ax MKIII is a superb atty and a great flavour producer. THats it mate.. It's from a thread we had going there about General genny builds. Some great info in there..and a great genny..
|
|
taff
Posts: 4,071
Last Online Apr 6, 2023 15:17:41 GMT
Likes: 3,290
Mar 1, 2017 20:00:42 GMT
|
Post by taff on Mar 13, 2017 19:29:09 GMT
Ah, I see theyve dun away with them *expletive* springs for holding the wire on. Lol... No mate they still use them, but they have a threaded centre post as an aftermarket purchase that I bought, as I could not get on with those grip sticks at all..so I swapped the centre post out in it, and then it worked like a dream.
|
|
|
Post by phtumshk on Mar 13, 2017 19:58:21 GMT
'Grip sticks' that was it, my mind went blank for the moment. I seriously dont know what they were thinking when they came up with them lol. Just when youve got it working good the crap builds up on the post and youd lose conection, then youd wreck your build trying to get it going again.
|
|