|
|
Post by possum on Sept 20, 2017 2:05:46 GMT
I always wonder what is the best non KF product for an as good or better MTL vape than a KF lite. I know I'm a KF fanboy hands up but the old KF got me off a lifetime of ciggs.and that's straight . I've been looking at alternatives recently and I would like to know what my fellow Cafe folk think and if they have an alternative , how does it stack up. The ones that came to mind for me were the Skyline, Berserker and last but not least the Keras Giga rev from Atmizoo. If any of you have one of these originals or clones please comment as to how you are getting on with same. If you consider another RTA that I have not mentioned as a good replacement please share that. The quest is for a single coil RTA topper with max flavour that you run at more than 1ohm and enjoy.  |
|
|
|
Post by SputNik on Sept 20, 2017 10:25:26 GMT
Can't really say I have used one possum but I'm pretty sure from the reviews I've seen of the skyline coppervape version is supposed to be very good and cheap as chip's on 3f vape
|
|
|
|
Post by phtumshk on Sept 20, 2017 11:04:22 GMT
If you dont mind clones the Doggy style seems popular these days and a personal favourite the cloudone.
|
|
Deleted
Deleted Member
Posts: 0
Last Online May 20, 2024 16:34:59 GMT
Likes:
May 20, 2024 16:34:59 GMT
|
Post by Deleted on Sept 20, 2017 14:37:40 GMT
Kayfun replacment
in order
Hussar single coil deck wit the 1.3mm air screw for Tight/nice MTL 2mm airscrew for relaxed toot With flavour of a KF proper flavour 5.7ml capacity, steel or pmma tanks and The easiest top fill 1/8th a turn Pull the top off, fill, Push top on, 1/8th turn , done,,
Skyline with Airdisk to suit
3ml capacity, despite the BS claims of the makers/cloners , its 3ml, measured
Flavour is stonking
JFC is a Pain in the cock, its That fine an adjustment your screwing it in for Ages to close it to refill, then take the top off After undoing a ring,, fill, top + ring on and screw it for ages to open the JFC BUT the flavour is brilliant esp with the airdisk YOU prefer (tighter than tight or slack alice loose)
3ml Can be got around with the use of an Aspire Clieto fat boy tank ,, NOT the 120 , takes it to 5 and a bit ml, BUT looks like a fat glass tank on a 22mm tank/mod
Rose 3 , forget it Too airy and a Biatch to get the coils in/aligned /wicked ,, usual eden mods bollox of FAR too many pissant parts and Over complex for what it is ANd needs its Own dt (which is crap) or a stupidly tight o-ring'd proper dt to work the JFC
EVL reaper V2
The best flavour ,end of,,
fkin Nightmare of a c*nt to wick so it Wont leak,, they do, it killed my dna75 thanks to fkin leaking "oh its seepage as the vapour is so dense " says the maker,, F*ck Right off its fkin leaking Even with the build he supplys it with.for the £,, id MUCH rather buy a clone hussar + option parts + spare tanks And a skyline + spare glass/airdisks and Still have £40 left
|
|
|
|
Post by Cyborg on Sept 20, 2017 17:17:05 GMT
Was a Kayfan but recently gone over to Wotofo Serpents, Mini, Sub (used with a Kanger rebuildable deck ) in 22 & 24mm and the SMM.
With a +Ω build & the airflow almost off even the SMM can be used MTL although I am using it restricted lung at the moment.
I haven’t fallen out with SvoeMesto and will end up getting the Prime when it’s available,
I like a single coil 1.8 Ω build so lots of the new stuff isn’t for me as its mostly multiple coils and made for cloud chasers.
|
|
hobbit
Full member
Posts: 117
Last Online Oct 6, 2018 0:57:34 GMT
Likes: 229
Mar 24, 2017 19:50:31 GMT
|
Post by hobbit on Sept 20, 2017 19:52:28 GMT
The hussar is my new favourite tank at the moment, landed an original a few weeks ago after trying a sausage first.
|
|
|
|
Post by phtumshk on Sept 20, 2017 21:06:18 GMT
Forgot to mention the digiflavour siren rta.
would never have bought 1 but picked it up in a trade and is fairly acceptable.
largish capacity with a glass tank for around 20 quid.
|
|
|
|
Post by possum on Sept 22, 2017 1:57:10 GMT
Thanks for your input all, the Hussar and Skyline are high on the list but I will be checking out reviews and availability for all suggestions.
|
|
|
|
Post by eatmabb on Sept 22, 2017 2:19:08 GMT
The Smokjoy Air 22 RTA is a good/great MTL/RLH tank.
|
|
erik514
Active Member
Posts: 50
Last Online Jul 28, 2023 10:47:56 GMT
Likes: 82
Mar 3, 2017 16:08:45 GMT
|
Post by erik514 on Sept 23, 2017 13:43:55 GMT
What about a squape? I've always really liked the vape from them, a bit pricey but e build quality is easily a match for kayfuns.
|
|
Deleted
Deleted Member
Posts: 0
Last Online May 20, 2024 16:34:59 GMT
Likes:
May 20, 2024 16:34:59 GMT
|
Post by Deleted on Sept 23, 2017 15:07:02 GMT
had a squape, and the r 23mm flavour Isnt as good as a kayfun a Pain to refill (compared to skyline/hussar/etc) Huge  nice but no kayfun and Certainly not a "kayfun replacment" or "kayfun killer" as lots hailed them as on launch theres a R sat on the desk atm, wicked it tried it,, didnt even finish the first tank of juice before it went on the stand and the kayfun went back on the mod,,, |
|
tomintoul
Full member
Posts: 128
Last Online Dec 8, 2019 19:14:31 GMT
Likes: 169
May 2, 2017 6:39:41 GMT
|
Post by tomintoul on Sept 24, 2017 15:19:47 GMT
The only one I've really taken to as a KF alternative, is the EVL Reaper either v1 or v2. Haven't tried a Skyline (bugger's always OOS)
|
|
Deleted
Deleted Member
Posts: 0
Last Online May 20, 2024 16:34:59 GMT
Likes:
May 20, 2024 16:34:59 GMT
|
Post by Deleted on Sept 28, 2017 0:17:13 GMT
how do you get past the leaking on the EVL ,, esp the V2 when you screw the top back on as that pressurises the tank ?
|
|
|
|
Post by Cyborg on Sept 29, 2017 17:22:16 GMT
Scrap my earlier post. Yes its still Kayfun. Get the Prime  |
|
|
|
Post by Cyborg on Sept 30, 2017 11:13:29 GMT
But seriously
The KS tank is worth a look, I have the 7ml one and must admit once I got the build and liquid flow sorted its really good.
I now know know whee to set the liquid flow so set that before reassembly, it eliminates trying to turn it using the drip tip.
|
|
Balders
Posts: 2,465
Last Online Jan 30, 2023 22:23:11 GMT
Likes: 2,680
Feb 27, 2017 16:56:59 GMT
|
Post by Balders on Sept 30, 2017 12:54:47 GMT
But seriously The KS tank is worth a look, I have the 7ml one and must admit once I got the build and liquid flow sorted its really good. I now know know whee to set the liquid flow so set that before reassembly, it eliminates trying to turn it using the drip tip. What's it like for flavour and have you experience leaking from it? |
|
|
|
Post by Cyborg on Sept 30, 2017 20:46:34 GMT
Flavor is good & I get no leaking. The caption under the picture was supposed to say – I now know where to set the liquid flow so I set it before reassembly, it eliminates trying to turn it using the drip tip. It was a bit of a pain to set up at first but now its simple. Beware of clones  |
|
