BoostLab Shift Rda

The postman knocked twice yesterday, and brought me the BoostLab Shift Rda.

Came in a small plastic box, with all sorts of spares, and a little Phillips head blue screwdriver, which won't actually work on this as the screws are slotted ones.... still nice thought eh!

Easy to change it to a squonk mod, simply by removing the small screw in the bottom of the 510 connection. 

The deck on it is great.  Very easy to stick a build on there, and enough room for even twin vertical coils if that's the way you want to do it.
On this one I have a single 0.8 ohm coil, Kanthal A1, with a very simple scrap of cotton trimmed just long enough to reach the fairly deep well deck. Indeed for such a small atty the deck holds a fair amount of juice so you aren't squonking all the time with it. 

The vape from this is excellent.. Loads and loads of flavour, about as good as my favourite small squonking rda the Origen Little 16, not too hot a vape either, but warm and saturated.

The squonk action on these is very good, a quick light squeeze and hold for a few seconds and the excess is fully drained back into the bottle.

The Air flow is controlled by a tiny! (Don't drop it!) screw that you wind down into the air hole to cut off some of the flow, and it works very well.  Fully screwed down it makes for a nice not too tight MTL draw, and with it all the way out a tight-ish direct lung hit is fine.

As you can see from the images it really is small sat on my Inbox,  and looks even smaller on the RockModz mech squonker.  Height excluding the drip tip is only 15.5mm and its a 22 mm atty.

The deck picture shows the small amount of cotton I used here...a small amount as i am using it as a squonker, so no need to pack the deck with cotton.  If I was using this as a standard Dripper, i would fill the deck loosely but because its so easy to keep wet a simple setup works great.







All in all, very happy with this small rda. It looks good, vapes very well, and is simple to build and maintain...whats not to like.

Cheers...