|
Post by possum on Oct 31, 2018 19:27:17 GMT
Finally the Dvarw MTL arrived today. I could never be accused of jumping straight in at the deep end . Got the full kit and it included all the airflow adapters but OMG did I get a land when I looked at the deck, this was going to be a bitch to build on and the juice intake holes are in the completely wrong place? Finally it dawned on me the surrounding cowl just pulls off allowing full access to the base plus positioning of the juice holes, phew. Anyway I'm sure their are loads of reviews for it but if any of you that use one can remember one that was spot on as to best wicking set up you might share same Ta. Off to have it's sonic bath now and setup tomorrow
|
|
Balders
Posts: 2,465
Last Online Jan 30, 2023 22:23:11 GMT
Likes: 2,680
Feb 27, 2017 16:56:59 GMT
|
Post by Balders on Oct 31, 2018 19:58:14 GMT
I've tried a couple off ways to wick mine, one of them has the wick just poking out of the wick holes and the other which seems to be performing better is to just stick a load of cotton into the base but making sure that it's combed out to make it nice and fluffy, but I'm sure that Rob on here will give you a lot better advice as he's what seems a lorry load of these tanks. But the flavour is great from these tanks and so far I've never had any juice leaks in mine, and so I hope you enjoy it as much as I enjoy vaping on mine.
|
|
|
Post by Rob on Oct 31, 2018 20:59:07 GMT
|
|
|
Post by possum on Oct 31, 2018 23:07:12 GMT
Thanks for sharing your vid Rob I take it the same procedure for a MTL version will be fine?
|
|
|
Post by Rob on Nov 1, 2018 6:30:13 GMT
Thanks for sharing your vid Rob I take it the same procedure for a MTL version will be fine? Yes possum I use the same method for both.
|
|
feeson
Posts: 1,454
Last Online May 9, 2024 9:11:57 GMT
Likes: 1,577
Apr 15, 2017 7:48:04 GMT
|
Post by feeson on Nov 1, 2018 15:54:24 GMT
I'll be interested to hear what you think possum I've been on the fence with that one for a while.
|
|
|
Post by possum on Nov 2, 2018 2:31:46 GMT
It will be making it's home debut over the weekend feeson so watch this space.
|
|
|
Post by possum on Nov 14, 2018 2:05:06 GMT
Well I've been using the Dvarw mtl now for nearly a week and I must say that I CAN see what all the fuss was about it's an excellent RTA. No flooding, no dry hits and very well made. Wicking is perfect having used different vg/pg combinations. I am using the 1.6/1.8mm air flow control adapter and getting a lovely vape from it. Unfortunately my 2 favorite juices are steeping at the mo but will be ready to "R en R" early next week so I can give my final conclusion as to it's flavor production but from what I've experianced so far this will not be an issue. The small chimney chamber is really bringing out great flavor from other juices I've been using. So it's an initial
|
|
|
Post by Rob on Jan 8, 2019 13:36:44 GMT
Team Dvarw - Three with fresh coils and fresh wicks and ready for juice. One with fresh juice just loaded and one operational! SVA Kimberly, 2 x Dani Mini's, Dani 21700 and Solar Storm!
|
|
|
Post by Cyborg on Jan 9, 2019 0:45:14 GMT
Looks like this is something worth investing in so I will add it to the wanted list.
|
|
|
Post by possum on Jan 9, 2019 3:23:40 GMT
Yes Cyborg definitely worth a go I have been using with my regular tobaccos and the flavor is very good, a very forgiving set up with neither flooding, leaking nor the hint of a dry hit and when using the "straw" fill method, as referred to in another thread, the volume to size ratio for a 22mm RTA is unbeatable
|
|
|
Post by Rob on Jan 12, 2019 15:49:30 GMT
Special Edition Dvarw DL's. Media Blasted, 24-carat Gold Plated and hand engraved! Why? Because Dvarw's Rock! <3
|
|