|
|
Post by bear on Nov 3, 2017 23:15:09 GMT
not mine but mite be of use to someone  link |
|
|
|
Post by SputNik on Nov 3, 2017 23:41:55 GMT
not mine but mite be of use to someone linkTank and top cap look very much like a Kayfun |
|
taff
Posts: 4,071
Last Online Apr 6, 2023 15:17:41 GMT
Likes: 3,290
Mar 1, 2017 20:00:42 GMT
|
Post by taff on Nov 4, 2017 0:13:07 GMT
Thats what i was also thinking mate, but no deck...and could be a clone also...
|
|
Deleted
Deleted Member
Posts: 0
Last Online May 10, 2024 17:08:01 GMT
Likes:
May 10, 2024 17:08:01 GMT
|
Post by Deleted on Nov 4, 2017 1:02:55 GMT
Kayfun tank sections put together oddly
SS lower + SS upper , smoked middle window,, SS Middle screwed on the bottom of them
without a pic showing the base + 510,,,,
|
|
taff
Posts: 4,071
Last Online Apr 6, 2023 15:17:41 GMT
Likes: 3,290
Mar 1, 2017 20:00:42 GMT
|
Post by taff on Nov 4, 2017 1:29:18 GMT
No Base and 510 Andy..
this is what he says...
Here we have a Unknown RDTA, bottom deck is missing selling as spares.
|
|
|
|
Post by possum on Nov 4, 2017 3:03:30 GMT
To me it's the base that's all wrong visually but for me a tenner bear would nearly cover the cost of a KF lite on FT when they return eventually but as spares who knows? Thanks for sharing. We are all stuck for spare bits and bobs all the time. A glass section here a chiminy section there etc.etc. Might be a good idea to list all ones old spares that one will no longer use or request a wanted spare part in a devoted section to same what do ye think? |
|
Deleted
Deleted Member
Posts: 0
Last Online May 10, 2024 17:08:01 GMT
Likes:
May 10, 2024 17:08:01 GMT
|
Post by Deleted on Nov 4, 2017 3:20:10 GMT
aha ! i saw the "link" to the fleabay listing that is a kayfun 3.1es clone missing the 510 pin And the 510 threaded base,, spares only and imho expensive for a clone set of spares FT used to sell an adapter that replaced the 510 pin+510 threaded base with one that allowed you to hybrid it onto a nemesis mech ,works well have one here with a 3.1es on one end and a brass nemi the other  shows the kayfun with the adapter on, the nemi top cap and the missing 2 parts  end result  the adapter the same seller has www.ebay.co.uk/itm/SvoeMesto-RDTA-Tank/222699641223 listed as well its a clone Bitsa ,, has a plastic chamber (visible thanks to the center section) ,, Avoid as they melt the air adjust being an allen screw = clone , and the logo,, SM never did that top cap is also a spare part, clone of, and the dt is a FT special,, (expect the glass to fall out of the metal when the glue gives up,, ) |
|
